Research Prime
Computational Fluid Dynamics→Resources: Software Links

Software Links for Computational Fluid Dynamics*
  • ADFC
    ADFC is a GPL (GNU Public License) solver that performs fluid dynamic simulation on a computer, helping professionals and researchers that need a virtual wind tunnel for their work or research. The program is able to solve Navier-Stokes equations for incompressible viscous flow in 2D and 3D geometries.This software tool provides much information about the cases it solves: speed field, pressure field, speed divergence, drag and lift coefficients, contaminant transport, pressure and speed gradient figures, turbulence distribution, particle tracing, and so on.

  • Code_Saturne
    Code_Saturne is the free, open-source software developed and released by EDF to solve computational fluid dynamics (CFD) applications.It solves the Navier-Stokes equations for 2D, 2D-axisymmetric and 3D flows, steady or unsteady, laminar or turbulent, incompressible or weakly dilatable, isothermal or not, with scalars transport if required.

  • Channelflow
    Channelflow is a software system for numerical analysis of the incompressible Navier-Stokes flow in channel geometries, written in C++. The core engine of Channelflow is a spectral CFD algorithm for integrating the Navier-Stokes equations. This engine drives a number of higher-level algorithms that (for example) compute equilibria, traveling waves, and periodic orbits of Navier-Stokes. Channelflow provides these algorithms in an easy-to-use, flexible, and intelligible form by using relatively modern software design. Channelflow consists of a software library for rapid, high-level development of spectral CFD codes and a set of predefined executable programs that perform common tasks involving CFD. Channelflow is customized for Fourier x Chebyshev x Fourier expansions appropriate for rectangular geometries with periodic boundary conditions in two directions and rigid walls in the remaining direction.

  • Clawpack
    Clawpack (“Conservation Laws Package”) is a collection of finite volume methods for linear and nonlinear hyperbolic systems of conservation laws. Clawpack employs high-resolution Godunov-type methods with limiters in a general framework applicable to many kinds of waves.

  • Diagonalized Upwind Navier Stokes (DUNS)
    The DUNS code is a research code developed at the Propulsion Engineering Research Center at Penn State University in the mid to late 1990's.

  • Dolfyn
    The Open Source CFD code dolfyn is an initiative in Noord-Brabant, a Dutch province in the south of the Netherlands, particularly in the region around Eindhoven. The goal of dolfyn is to promote, introduce and teach the use of modern numerical simulation techniques in general and the use of Computational Fluid Dynamics (CFD) in particular.

  • Elmer
    Elmer is an open source multiphysical simulation software mainly developed by CSC - IT Center for Science (CSC). Elmer includes physical models of fluid dynamics, structural mechanics, electromagnetics, heat transfer and acoustics, for example. These are described by partial differential equations which Elmer solves by the Finite Element Method (FEM).

  • Fire Dynamics Simulator (FDS)
    Fire Dynamics Simulator (FDS) is a large-eddy simulation (LES) code for low-speed flows, with an emphasis on smoke and heat transport from fires.

  • FEATFLOW
    The progam package FEATFLOW is both a user oriented as well as a general purpose subroutine system for the numerical solution of the incompressible Navier-Stokes equations in two and three space dimensions.

  • FreeFEM
    FreeFEM is a popular 2D and 3D partial differential equations (PDE) solver used by thousands of researchers across the world.It allows you to easily implement your own physics modules using the provided FreeFEM language. FreeFEM offers a large list of finite elements, like the Lagrange, Taylor-Hood, etc., usable in the continuous and discontinuous Galerkin method framework.

  • Gerris
    Gerris is a Free Software program for the solution of the partial differential equations describing fluid flow. The source code is available free of charge under the Free Software GPL license.

  • iNavier
    iNavier is a Navier Stokes equation solver. It is a pressure based segregated solver. The velocity pressure coupling is by SIMPLE algorithm. The current release of solver provides with following turbulence model:

  • ISAAC
    ISAAC (Integrated Solution Algorithm for Arbitrary Configurations) is a compressible Euler/Navier-Stokes computational fluid dynamics code. ISAAC includes the capability of calculating the Euler equations for inviscid flow or the Navier-Stokes equations for viscous flows. ISAAC uses a domain decomposition structure to accomodate complex physical configurations. ISAAC can calculate either steady-state or time dependent flow.

  • Kicksey-Winsey

  • MFiX
    MFIX (Multiphase Flow with Interphase eXchanges) is a general-purpose computer code developed at the National Energy Technology Laboratory (NETL) for describing the hydrodynamics, heat transfer and chemical reactions in fluid-solids systems. It has been used for describing bubbling and circulating fluidized beds and spouted beds. MFIX calculations give transient data on the three-dimensional distribution of pressure, velocity, temperature, and species mass fractions. MFIX code is based on a generally accepted set of multiphase flow equations. The code is used as a "test-stand" for testing and developing multiphase flow constitutive equations.

  • Nek5000
    Nek5000 is a computational fluid dynamics code that simulates unsteady incompressible fluid flow with thermal and passive scalar transport. It can handle general two- and three-dimensional domains described by isoparametric quad or hex elements. In addition, it can be used to compute axisymmetric flows. Nek5000 won a Gordon Bell prize for its outstanding scalability on high-performance parallel computers.

  • OpenFOAM
    OpenFOAM is the free, open source CFD software developed primarily by OpenCFD Ltd since 2004. It has a large user base across most areas of engineering and science, from both commercial and academic organisations.

  • OpenFVM
    OpenFVM is a general CFD solver released under the GPL license. It was developed to simulate the flow in complex 3D geometries. Therefore, the mesh can be unstructured and contain control volumes with arbitrary shape. The code uses the finite volume method to evaluate the partial differential equations. As well as solving the velocity and pressure fields, the code is capable of solving non-isothermal multiphase flow.The code has two implementations: serial and parallel. The serial version uses LASPACK as the linear matrix solver and the parallel one uses the PETSc library. Both implementations use the open source tool Gmsh for pre- and post-processing.

  • OpenFlower
    OpenFlower is a free and open source CFD code (for Linux and Windows) mainly intended to solve the turbulent incompressible Navier-Stokes equations with a LES approach. It can deal with arbitrary complex 3D geometries with its finite volume approach.

  • OpenLB
    The OpenLB project provides a C++ package for the implementation of lattice Boltzmann methods that is general enough to address a vast range of tansport problems, e.g. in computational fluid dynamics. The source code is publicly available and constructed in a well readable, modular way. This enables for a fast implementation of both simple academic test problems and advanced engineering applications. It is also easily extensible to include new physical content.

  • PETSc-FEM
    This is PETSc-FEM, a general purpose, parallel, multi-physics FEM (Finite Element Method) program for CFD (Computational Fluid Dynamics) applications based on PETSc . PETSc-FEM comprises both a library that allows the user to develop FEM (or FEM-like, i.e. non-structured mesh oriented) programs, and a suite of application programs. It is written in the C++ language with an OOP (Object Oriented Programming) philosophy, keeping in mind the scope of efficiency. PETSc-FEM may run in parallel using the MPI standard on a variety of architectures, but currently it has been tested in Beowulf clusters only.

  • SALOME
    SALOME is an open-source software that provides a generic Pre- and Post-Processing platform for numerical simulation. It is based on an open and flexible architecture made of reusable components.SALOME can be used as a standalone application for generation of the CAD model, its preparation for the numerical calculations and post-processing of the calculation results.SALOME can also be used as a platform for integration of the external third-party numerical codes to produce a new application for the full life-cycle management of CAD models.

  • SLFCFD
    SLFCFD stands for San Le's Free Computational Fluid Dynamics. It is a package of scientific software and graphical user interfaces for use in computational fluid dynamics. It is written in ANSI C by San Le and distributed under the terms of the GNU license.

  • TYPHON
    TYPHON is an open source CFD software. TYPHON is an open-source CFD project for users and developpers. It has been designed as a multi-solver platform where it could be easily added a new solver or a new data structure.For now, it provides a finite volume solver for compressible flows (inviscid or laminar) and a finite volume solver for heat transfer (with BC inverse capabality).

  • 3D ANSYS CFD Viewer The ANSYS CFD Viewer displays 3D graphics objects in an interactive window. This viewer is provided free of charge, is not license key controlled, and is freely distributable under the terms of the license agreement included in the installation. With this viewer, users can share 3D graphics with colleagues or customers, as an alternative to sending static (2D) images. It also allows users to show 3D graphics within html browsers, such as Internet Explorer, as well as embed 3D graphics into PowerPoint presentations.
  • ANSYS CFX
    ANSYS CFX is a high-performance computational fluid dynamics (CFD) software tool that delivers reliable and accurate solutions quickly and robustly across a wide range of CFD and multiphysics applications. CFX is recognized for its outstanding accuracy, robustness and speed when simulating turbomachinery, such as pumps, fans, compressors and gas and hydraulic turbines.

  • ANSYS Fluent
    Fluent software contains the broad, physical modeling capabilities needed to model flow, turbulence, heat transfer and reactions for industrial applications. These range from air flow over an aircraft wing to combustion in a furnace, from bubble columns to oil platforms, from blood flow to semiconductor manufacturing and from clean room design to wastewater treatment plants. Fluent spans an expansive range, including special models, with capabilities to model in-cylinder combustion, aero-acoustics, turbomachinery and multiphase systems.

  • AcuSolve
    Built upon a rigorous scientific foundation, Altair AcuSolve is a proven asset for companies looking to explore their designs. AcuSolve provides powerful fluid flow analysis capabilities without the difficulties associated with traditional CFD applications.

  • AcuDesktop
    AcuDesktop is an industrial strength, general-purpose, desktop based Computational Fluid Dynamics (CFD) software developed by ACUSIM Software, Inc., the developer of leading commercial finite element-based CFD solver technology and solutions.

  • ADINA FSI
    ADINA offers fluid-structure interaction capabilities in one single program for the solution of problems where the fluids are fully coupled to general structures that can undergo highly nonlinear response due to large deformations, inelasticity, contact and temperature-dependency. A fully coupled fluid-structure interaction means that the response of the solid is strongly affected by the response of the fluid, and vice versa.

  • ADINA Multiphysics
    The ADINA Multiphysics package includes all ADINA solvers for solids and structures, heat transfer, CFD, and also a comprehensive array of multiphysics capabilities tightly integrated in one program.

  • ADINA CFD
    The ADINA CFD program provides state-of-the-art finite element and control volume capabilities for incompressible and compressible flows. The flows may contain free surfaces and moving interfaces between fluids, and between fluids and structures. An arbitrary Lagrangian-Eulerian (ALE) formulation is used. The procedure used in ADINA CFD is based on finite element and finite volume discretization schemes, with a most general and efficient solution approach. General flow conditions in arbitrary geometries can be solved.

  • ANSWER
    ANSWER is highly modular and presents a versatile interface to the user. It provides a platform to quickly experiment with new physical models, numerical schemes, matrix solvers, etc.

  • ACE+ Suite
    ACE+ Suite offers CFD and Multiphysics solutions for Semiconductor, Microfluidics, Energy & advanced Automotive applications.

  • CFD Module
    Simulate Fluid Flow Applications with the CFD Module. Define and solve models for studying systems containing fluid flow and fluid flow coupled to other physical phenomena with the CFD Module, an add-on product to the COMSOL Multiphysics simulation platform.

  • CFDStudio
    In technical terms, CFDStudio is a "wysiwyg" (what you see is what you get) type of development environment for CFD applications. That is, as you are setting up a CFD problem, there is never a blind spot, you can always visualize what type of boundary condition you are specifying, and to what region. Any specification that you have provided can be viewed at a later time. CFDStudio is written mostly in Java, hence requires a Java Runtime Environment (JRE) to operate. The major advantage of a software written in Java language is that with very minor modifications, the software not only operates, but actually "looks and feels" the same among a multitude of platforms, ranging from Windows to LINUX, and different flavors of UNIX.

  • ICFD++
    ICFD++ can be used to simulate compressible and incompressible fluids and flows, unsteady and steady flows, large range of speed regimes including low speeds through subsonic, transonic, supersonic and hypersonic speeds, laminar and turbulent flows, various equations of state.

  • CFD2000
    CFD2000 is an advanced, general-purpose computational fluid dynamics (CFD) software system for simulating a wide range of fluid flow, heat transfer, and mass transfer problems. The CFD2000 system is exceptionally easy to learn and can be quickly mastered by scientists and engineers.

  • CFD-CADalyzer
    CFD-CADalyzer provides the design engineer with enhanced decision support by permitting rapid sequential or parallel CFD simulations to assess the potential performance of multiple design variants and alternatives. CFD-CADalyzer has been designed to work directly on the CAD model, avoiding the pitfalls associated with translation between different geometry representations.

  • Coolit
    The world's easiest-to-use computational fluid dynamics (CFD) software for thermal management of electronics. Innovative, intuitive and powerful, Coolit guides the novice, yet imparts full control to the thermal expert.

  • CoolitPCB
    Powerful and highly affordable CoolitPCB enables PCB designers to do their own board level thermal analyses. Electrical engineers now can predict the thermal behavior of their designs and pinpoint optimum component placement on their boards. There is no need for CFD expertise; CoolitPCB's intelligent user interface steers the user through the solution process. But users shouldn't be fooled by this simplicity. Under the hood is the Coolit's robust, proven and advanced computational engine, that has been successfully used in thousands of design projects.

  • COMSOL Multiphysics
    COMSOL Multiphysics is a simulation platform that encompasses all of the steps in the modeling workflow — from defining geometries, material properties, and the physics that describe specific phenomena to solving and postprocessing models for producing accurate and trustworthy results.

  • CFDExpert

  • ANSYS Chemkin Enterprise
    ANSYS Chemkin Enterprise provides all the tools for fast, accurate combustion and reaction flow simulations bundled into a single license. The package includes detailed fuel models with broad and deep simulation software whose hallmark is accuracy and best-practice methodologies. These tools help you achieve your performance and fuel efficiency goals cost-effectively and without compromising time to solution. You can reduce chemistry analysis time by orders of magnitude, virtually eliminating the bottleneck that chemistry integration normally produces during the simulation process. Faster time to solution means you can spend more effort exploring design alternatives, conducting experiments, understanding where and why problems occur and explaining observations without sacrificing accuracy.

  • DLR TAU

  • EasyCFD
    EasyCFD is a computational fluid dynamics (CFD) software tool for the numerical simulation of two-dimensional and 3D axisymmetric fluid flow in a boundary fitted mesh. EasyCFD is based in a user-friendly graphical interface, allowing the user to easily draw the geometry, impose boundary conditions, control calculation parameters (subrelaxation coefficients, advection schemes, etc) and post-process the results. Geometry definition can also be done by importing data from a DXF file or a point data file.

  • FLOW-3D
    Optimize product designs and reduce time to market with FLOW-3D, a highly-accurate CFD software that specializes in solving transient, free-surface problems. A uniquely powerful, multiphysics tool, FLOW-3D provides the functionality, ease-of-use and power that helps engineers advance their modeling objectives. Built for the highest level of performance, FLOW-3D seamlessly scales from standard workstation solutions to hundreds of CPU core solutions on high performance computing cluster solutions.

  • FloVENT
    FloVENT is powerful computational fluid dynamics (CFD) software that predicts 3D airflow, heat transfer, contamination distribution and comfort indices in and around buildings of all types and sizes. FloVENT’s fast and easy-to-use menu system is designed specifically for engineers involved in the design and optimization of heating, ventilating and air conditioning (HVAC) systems.

  • Flowmaster
    FloMASTER, formerly known as Flowmaster, is the leading general purpose 1D computational fluid dynamics (CFD) solution for the modeling and analysis of fluid mechanics in complex piping systems of any scale.

  • FINE/Turbo
    FINE/Turbo is the fastest CFD suite for rotating machinery - incompressible and compressible fluids, from subsonic to hypersonic flow regimes. Solve your problem up to 20 times faster and more with the CPU Booster module.

  • FINE/Marine
    The leading CFD software for naval architects and marine engineers

  • Fluidyn-MP
    fluidyn-MP is a unique design engineer friendly CFD software having multi-physics capability. It has been optimized to do simultaneous simulation of fluid mechanics, structural response, heat transfer and various other design problems, especially for mechanical and chemical engineers.

  • FENSAP-ICE
    FENSAP-ICE provides leading three-dimensional, state-of-the-art, design and aid-to-certification simulation software to provide enhanced aerodynamic and in-flight icing protection solutions in a cost-effective manner by addressing all five major aspects of in-flight icing.

  • FLACS
    FLACS is the industry standard for CFD explosion modelling and one of the best-validated tools for modelling flammable and toxic releases in the technical safety context. FLACS is a comprehensive, yet easy to use, software tool for modelling (dispersion, fire and explosion) consequences in full 3D for all typical flammable and toxic release scenarios. It is used extensively in the oil and gas and process industries and also increasingly in the nuclear industry, in facilities with dust explosion potential and many other fields. By modelling with CFD (Computational Fluid Dynamics) in full 3D, it is possible to predict consequences much more accurately and to include the effect of all contributing and mitigating effects (such as confinement and congestion due to real geometry, ventilation, deluge).

  • FloEFD
    FloEFD is a full-featured 3D computational fluid dynamics analysis solution built into major MCAD systems such as Creo, CATIA V5, Siemens NX, Solid Edge and SolidWorks. It tightly integrates with Inventor.

  • FloTHERM
    FloTHERM uses advanced CFD techniques to predict airflow, temperature, and heat transfer in components, boards, and complete systems, including racks and data centers. It's also the industry's best solution for integration with MCAD and EDA software.

  • FlowVision
    An engineer to engineer CFD software for advanced realistic flow and multiphysics simulations

  • Gmsh
    Gmsh is an open source 3D finite element mesh generator with a built-in CAD engine and post-processor. Its design goal is to provide a fast, light and user-friendly meshing tool with parametric input and advanced visualization capabilities. Gmsh is built around four modules: geometry, mesh, solver and post-processing. The specification of any input to these modules is done either interactively using the graphical user interface, in ASCII text files using Gmsh's own scripting language (.geo files), or using the C++, C, Python or Julia Application Programming Interface (API).

  • GASP
    GASP is a structured/unstructured, multi-block CFD flow solver which solves the Reynolds Averaged Navier-Stokes (RANS) equations as well as the heat conduction equation for solid bodies.

  • Icepak
    ANSYS Icepak provides powerful electronic cooling solutions which utilize the industry-leading ANSYS Fluent computational fluid dynamics (CFD) solver for thermal and fluid flow analyses of integrated circuits (ICs), packages, printed circuit boards (PCBs) and electronic assemblies. The ANSYS Icepak CFD solver uses the ANSYS Electronics Desktop (AEDT) graphical user interface (GUI). This provides a CAD-centric solution for engineers who can leverage the easy-to-use ribbon interface to manage thermal issues within the same unified framework as ANSYS HFSS, ANSYS Maxwell and ANSYS Q3D Extractor. Electrical and mechanical engineers working in this environment will enjoy a completely automated design flow with seamless coupling from HFSS, Maxwell and Q3D Extractor into Icepak for steady-state or transient thermal analysis.

  • Kameleon FireEX KFX
    Kameleon FireEx KFX is a leading CFD simulator, dedicated to gas dispersion, flare and fire simulation.

  • KIVA
    The KIVA family of Computational Fluid Dynamics (CFD) software predicts complex fuel and air flows as well as ignition, combustion, and pollutant-formation processes in engines.

  • MicroFlo
    Undertake internal or external air flow and thermal studies using Computation Fluid Dynamics (CFD)

  • NOGRID POINTS - MESHLESS CFD SOFTWARE
    NOGRID points software, based on the meshless Finite Pointset Method (FPM), is a Computational Fluid Dynamics (CFD) software package for simulation tasks in the wide area of flow and continuum mechanical problems. The software doesn't solve only fluid flows, but also problems with elastic or plastic deformations.

  • NX Flow
    NX Flow software is a computational fluid dynamics (CFD) add-on solution that is fully integrated into NX Advanced FEM and NX Advanced Simulation. It provides sophisticated tools to model and simulate fluid flow for complex parts and assemblies.

  • NX Advanced Flow
    NX Advanced Flow software is a powerful and comprehensive solution for computational fluid dynamics (CFD) problems. NX Advanced Flow is an add-on module to both NX Flow and NX Electronic Systems Cooling that extends the flow simulation capabilities of these products to include internal or external fluid flow including compressible and high-speed flows, nonNewtonian fluids, tracking of heavy particles, and multiple rotating frames of reference.

  • NX Electronic Systems Cooling
    NX Electronic Systems Cooling is ideal for modeling and analyzing electronics cooling applications with complex 3D design geometry.

  • Passage
    Passage software is a collection of finite element programs solving complex flow, heat transfer and other related problems in product design and manufacturing using advance CAE techniques.

  • POLYFLOW
    Polyflow accelerates design while shrinking energy and raw material demands to make your manufacturing processes more cost-effective and environmentally sustainable.

  • PAM-FLOW

  • PHOENICS
    PHOENICS is a reliable, cost-effective CFD program with a proven track record simulation scenarios involving fluid flow, heat or mass transfer, chemical reactions and combustion for a wide range of applications.

  • PowerFLOW
    COMPUTATIONAL FLUID DYNAMICS SIMULATION SOFTWARE IMPROVING PRODUCT DESIGN & DEVELOPMENT

  • PumpLinx
    PumpLinx is a 3-D Computational Fluid Dynamics (CFD) tool that provides accurate virtual testing for the analysis and performance prediction of fluid pumps, motors, compressors, turbines, valves, and complete fluid systems with rotating/sliding components.

  • RheoChart
    RheoChart is a charting program to analyse the behaviour of a large range of differential viscoelastic models. In a few clicks, the response of models such as the Giesekus, PTT or the DCPP models can be analysed in a dynamic chart.

  • STAR-CCM+
    Simcenter STAR-CCM+ is a complete multiphysics solution for the simulation of products and designs operating under real-world conditions. Uniquely, Simcenter STAR-CCM+ brings automated design exploration and optimization to the simulation toolkit of every engineer, allowing you to efficiently explore the entire design space instead of focusing on single point design scenarios.

  • srm suite
    The SRM Engine Suite is a virtual engineering design tool for simulating the performance and exhaust gas emissions from internal combustion engines. Example applications have included motorcycle, passenger car, motor sport, truck, locomotive, marine and power generation.

  • SMARTFIRE
    SMARTFIRE is an advanced Computational Fluid Dynamics (CFD) fire simulation environment developed by the Fire Safety Engineering Group (FSEG) at the University of Greenwich. Unlike other CFD software used to simulate fire, SMARTFIRE has been specifically designed and developed as a Fire Simulation Tool to be used by Fire Engineers and is based on more than 20 years of CFD fire modelling experience and research of FSEG.

  • Stallion 3D
    Stallion 3D quickly generates aerodynamic performance data (lift, drag and moments) for new and existing CAD designs. Get superior RANS results without having to make a single grid. Grid generation in Stallion 3D is fully automatic. This eliminates the most time consuming and painful bottleneck in CFD. Stallion 3D quickly and accurately predicts the aerodynamic performance of your designs using its proprietary CFD algorithm (HIST). The software imports your CAD models and generates the 3D aerodynamic data needed to verify your designs and ensure your success.

  • TurboGrid
    ANSYS TurboGrid software includes novel technology that targets complete automation combined with an unprecedented level of mesh quality for even the most complex blade shapes. The desired final mesh size is defined (and, optionally, the blade boundary layer resolution), and all the other steps are performed automatically to produce a mesh of extremely high quality. Grid angles are exceptionally good, mesh sizes transition smoothly, and high aspect-ratio elements are generated in the near-wall regions to resolve these regions efficiently and capture boundary layer flows accurately.

  • TURBOdesign CFD
    A 3D Analysis Code for Turbomachinery CFD

  • Tdyn: The ultimate simulation technology
    Tdyn features a comprehensive simulation suite that provides solution to nearly any engineering calculation need. The product offers a unique solution for structural, flow, heat transfer, coupled, multi-physics and seakeeping problems in a single integrated package. Tdyn is conceived to merge with your current engineering processes, increasing your productivity and helping you to optimize your designs. Tdyn introduces a variety of tools to interact with your analyses, allowing having a perfect control over the design process.

  • ZNTutor-CFD

  • 3D CAD
    SOLIDWORKS 3D CAD solutions provide easy-to-learn, yet extremely powerful functionality that shortens product development time, reduces costs, and improves quality.

  • 6SigmaDC
    6SigmaRoom is the industry's leading data center CFD tool, built for both data center design and operations. Its 3D representation of the physical data center - combined with our cutting-edge CFD (computational fluid dynamics) solver - lets you safely simulate the impact of change on a data center's resilience, physical capacity and cooling efficiency.


*Disclaimer: The software listed above are for information purpose only and csfreelist has nothing to do with these software and their respective organizations. We DO NOT guarantee about the correctness, perfectness, flawlessness, etc. of the information provided on this webpage and on other information-purpose webpages of this website. For the contents of Third party websites / resources, we take absolutely no responsibility. The software which are free are conditionally free and available with terms & conditions established by their developers and other concerned persons / organizations. For exact terms & conditions, please visit their websites and /or contact them.

Subscribe for receiving latest updates in Computational Sciences